CCNA 2 SRWE Final Skills Exam (PTSA) Answers Switching, Routing, and Wireless Essentials ( Version 7.00) – SRWE Final PT Skills Assessment (PTSA) Topology VLAN Table VLAN Router Subinterface VLAN Name 2 G0/0/1.2 Bikes 3 G0/0/1.3 Trikes 4 G0/0/1.4 Management 5 N/A Parking 6 G0/0/1.6 Native Addressing Table Device / Interface IP Address/Prefix/Link Local Address Default Gateway R1 G0/0/1.2 10.19.8.1 /26 N/A 2001:db8:acad:a::1 /64 N/A fe80::1 N/A R1 G0/0/1.3 10.19.8.65 /27 N/A 2001:db8:acad:b::1 /64 N/A fe80::1 N/A R1 G0/0/1.4 10.19.8.97 /29 N/A 2001:db8:acad:c::1 /64 N/A fe80::1 N/A R1 G0/0/1.6 N/A N/A R1 Loopback0 209.165.201.1 /27 N/A 2001:db8:acad:209::1 /64 N/A fe80::1…
Author: adminccna
ENSA Final Skills Exam (PTSA) Exam Answers Enterprise Networking, Security, and Automation ( Version 7.00) – ENSA Final PT Skills Assessment (PTSA) Exam Answers A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button in the browser window to submit your work. Topology Addressing Table Device Name G0/0/0 IP Address Default Gateway R1 G0/0/0 198.51.100.1/30 N/A G0/0/1 192.168.1.1/24 N/A G0/0/2 64.100.1.1/29 N/A R2 G0/0/0…
CCNA 2 Switching, Routing, and Wireless Essentials ( Versión 7.00) – SRWE Practice PT Skills Assessment (PTSA) – Part 2 Answers SRWE Practice PT Skills Assessment (PTSA) – Part 2 CCNAv7: Switching, Routing, and Wireless Essentials v7.0 (SRWE) Part 4: Configure a Wireless LAN using a Wireless LAN Controller In this part of the assessment, you will configure the wireless LAN controller to provide access wireless access to the network. Username and password are the default admin/admin. Connect to the WLC over HTTPS to the management interface. Open the browser from the desktop of W-Admin Host or (Management Host). Connect…
SRWE Practice PT Skills Assessment (PTSA) – Part 1 Exam Answers Switching, Routing, and Wireless Essentials ( Version 7.00) – SRWE Practice PT Skills Assessment (PTSA) – Part 1 Answers
CCNAv7: Introduction to Networks – ITN ( Version 7.00) – ITNv7 Practice Final Exam 1. Which two acronyms represent the data link sublayers that Ethernet relies upon to operate? (Choose two.) SFD LLC CSMA MAC FCS 2. A network team is comparing topologies for connecting on a shared media. Which physical topology is an example of a hybrid topology for a LAN? bus extended star ring partial mesh 3. Refer to the exhibit. PC1 issues an ARP request because it needs to send a packet to PC3. In this scenario, what will happen next? SW1 will send an ARP reply…
CCNAv7: Introduction to Networks – Practice PT Skills Assessment (PTSA) Exam Answers ITN ( Version 7.00) – ITN Practice PT Skills Assessment (PTSA) Answers (Same) Type 2 (just different names devices) ITN Practice Skills Assessment – Packet Tracer Answers A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button in the browser window to submit your work. Introduction In this assessment, you will configure…
Modules 16 – 17: Building and Securing a Small Network Exam – ITN ( Version 7.00) – Building and Securing a Small Network Exam Answers 1. A network engineer is troubleshooting connectivity issues among interconnected Cisco routers and switches. Which command should the engineer use to find the IP address information, host name, and IOS version of neighboring network devices? show version show ip route show interfaces show cdp neighbors detail 2. What information about a Cisco router can be verified using the show version command? the routing protocol version that is enabled the value of the configuration register the…
Modules 14 – 15: Network Application Communications Exam – ITN ( Version 7.00) – Network Application Communications Exam Answers 1. What type of information is contained in a DNS MX record? the FQDN of the alias used to identify a service the IP address for an FQDN entry the domain name mapped to mail exchange servers the IP address of an authoritative name server 2. Which three protocols operate at the application layer of the TCP/IP model? (Choose three.) ARP TCP UDP FTP POP3 DHCP 3. Which protocol is used by a client to communicate securely with a web server?…
Modules 14 – 15: Network Application Communications Exam – ITN ( Version 7.00) – Network Application Communications Exam Answers 1. A user issues a ping 192.135.250.103 command and receives a response that includes a code of 1 . What does this code represent? host unreachable beyond scope of the source address address unreachable communication with the destination administratively prohibited 2. A user issues a ping fe80:65ab:dcc1::100 command and receives a response that includes a code of 3. What does this code represent? address unreachable communication with the destination administratively prohibited beyond scope of the source address no route to destination…
Modules 8 – 10: Communicating Between Networks Exam – ITN ( Version 7.00) – Communicating Between Networks Exam Answers 1. Match the configuration mode with the command that is available in that mode. (Not all options are used.) 2. Which three commands are used to set up secure access to a router through a connection to the console interface? (Choose three.) interface fastethernet 0/0 line vty 0 4 line console 0 enable secret cisco login password cisco 3. Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a description of the default gateway address? It…
Modules 4 – 7: Ethernet Concepts Exam – ITN ( Version 7.00) – Ethernet Concepts Exam Answers 1. Which switching method uses the CRC value in a frame? cut-through fast-forward fragment-free store-and-forward 2. Which is a multicast MAC address? FF-FF-FF-FF-FF-FF 5C-26-0A-4B-19-3E 01-00-5E-00-00-03 00-26-0F-4B-00-3E 3. Refer to the exhibit. What is wrong with the displayed termination? The woven copper braid should not have been removed. The wrong type of connector is being used. The untwisted length of each wire is too long. The wires are too thick for the connector that is used. 4. Refer to the exhibit. The PC is…