10.4.3 Packet Tracer – Basic Device Configuration (Instructions Answer)

10.4.3 Packet Tracer – Basic Device Configuration Instructor Version

Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only.

Topology

Addressing Table

Objectives

• Complete the network documentation.
• Perform basic device configurations on a router and a switch.
• Verify connectivity and troubleshoot any issues.

Scenario

Your network manager is impressed with your performance in your job as a LAN technician. She would like you to demonstrate your ability to configure a router that connects two LANs. Your tasks include configuring basic settings on a router and a switch using the Cisco IOS. You will also configure IPv6 addresses on network devices and hosts. You will then verify the configurations by testing end-to-end connectivity. You goal is to establish connectivity between all devices.

Note: The VLAN1 interface on Class-A will not be reachable over IPv6.

In this activity you will configure the College router, Class-B switch, and the PC hosts.

Note: Packet Tracer will not score some configured values, however these values are required to accomplish full connectivity in the network.

Requirements

• Provide the missing information in the Addressing Table.
• Name the router College and the second switch Class-B. You will not be able to access the Class-A switch.
• Use cisco as the user EXEC password for all lines.
• Use class as the encrypted privileged EXEC password.
• Encrypt all plaintext passwords.
• Configure an appropriate banner.
• Configure IPv4 and IPv6 addressing for the College switch according to the Addressing Table.
• Configure IPv4 and IPv6 addressing for the Class-B switch according to the Addressing Table.
• The hosts are partially configured. Complete the IPv4 addressing, and fully configure the IPv6 addresses according to the Addressing Table.
• Document interfaces with descriptions, including the Class-B VLAN 1 interface.
• Save your configurations.
• Verify connectivity between all devices. All devices should be able to ping all other devices with IPv4 and IPv6.
• Troubleshoot and document any issues.
• Implement the solutions necessary to enable and verify full end-to-end connectivity.

Note: Click Check Results button to see your progress. Click the Reset Activity button to generate a new set of requirements

Answers Key

College Router

enable
config terminal
hostname College

enable secret class
line console 0
password cisco
login
line vty 0 15
password cisco
login
exit
service password-encryption

banner motd #Unauthorized access to this device is prohibited!#

interface g0/0
ip address 128.107.20.1 255.255.255.0
ipv6 address 2001:db8:a::1/64
ipv6 address FE80::1 link-local
description Link to Class-A
no shutdown

interface g0/1
ip address 128.107.30.1 255.255.255.0
ipv6 address 2001:db8:b::1/64
ipv6 address FE80::1 link-local
description Link to Class-B
no shutdown
exit

ipv6 unicast-routing
end
copy running-config startup-config

Class-B Switch

enable
configure terminal
hostname Class-B
banner motd #Unauthorized access to this device is prohibited!#

enable secret class
line console 0
password cisco
login
line vty 0 4
password cisco
login
exit
service password-encryption

interface vlan 1
description Vlan 1
ip address 128.107.30.15 255.255.255.0
no shutdown
end

copy running-config startup-config

PCs host

Download PDF & PKA file:

[sociallocker id=”54558″]
[wpdm_package id=’37034′]
[wpdm_package id=’37035′]
[/sociallocker]

[alert-note][one_half]

Previous Lab
10.3.5 Packet Tracer – Troubleshoot Default Gateway Issues

[/one_half][one_half_last]

Next Lab
11.5.5 Packet Tracer – Subnet an IPv4 Network

[/one_half_last][/alert-note]