2.9.1 Packet Tracer – Basic Switch and End Device Configuration – Instructions Answer

2.9.1 Packet Tracer – Basic Switch and End Device Configuration Instructor Version

Topology Isomorphs

Addressing Table

Scenario 1

Objectives

• Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI).
• Use Cisco IOS commands to specify or limit access to the device configurations.
• Use IOS commands to save the running configuration.
• Configure two host devices with IP addresses.
• Verify connectivity between the two PC end devices.

Scenario

As a recently hired LAN technician, your network manager has asked you to demonstrate your ability to configure a small LAN. Your tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. You are to use two switches and two hosts/PCs on a cabled and powered network.

Instructions

Configure the devices to fulfill the requirements below.

Requirements

• Use a console connection to access each switch.
• Name Class-A and Class-B switches.
• Use the R4Xe3 password for all lines.
• Use the C4aJa secret password.
• Encrypt all clear text passwords.
• Configure an appropriate message-of-the-day (MOTD) banner.
• Configure addressing for all devices according to the Addressing Table.
• Save your configurations.
• Verify connectivity between all devices.

Note: Click Check Results to see your progress. Click Reset Activity to generate a new set of requirements. If you click on this before you complete the activity, all configurations will be lost.

Full Script answers:

Class-A

enable
config terminal
hostname Class-A
enable secret C4aJa
line console 0
password R4Xe3
login
line vty 0 4
password R4Xe3
login
exit
service password-encryption
banner motd #Unauthorized access to this device is prohibited!#
interface vlan 1
ip address 128.107.20.10 255.255.255.0
no shutdown
end
copy running-config startup-config

Class-B

enable
config terminal
hostname Class-B
enable secret C4aJa
line console 0
password R4Xe3
login
line vty 0 4
password R4Xe3
login
exit
service password-encryption
banner motd #Unauthorized access to this device is prohibited!#
interface vlan 1
ip address 128.107.20.15 255.255.255.0
no shutdown
end
copy running-config startup-config

Download PDF & PKA file:

[sociallocker id=”54558″]
[wpdm_package id=’37009′]
[wpdm_package id=’37010′]
[/sociallocker]

[alert-note][one_half]

Previous Lab
2.7.6 Packet Tracer – Implement Basic Connectivity

[/one_half][one_half_last]

Next Lab
3.5.5 Packet Tracer – Investigate the TCP-IP and OSI Models in Action

[/one_half_last][/alert-note]