6.5.6 Packet Tracer – Configure Dynamic NAT (Answers)

6.5.6 Packet Tracer – Configure Dynamic NAT (Instructor Version)

Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only.

Objectives

• Part 1: Configure Dynamic NAT
• Part 2: Verify NAT Implementation

Instructions

Part 1: Configure Dynamic NAT

Step 1: Configure traffic that will be permitted.

On R2, configure one statement for ACL 1 to permit any address belonging to the 172.16.0.0/16 network.

R2(config)# access-list 1 permit 172.16.0.0 0.0.255.255

Step 2: Configure a pool of address for NAT.

Configure R2 with a NAT pool that uses two addresses in the 209.165.200.228/30 address space.

R2(config)# ip nat pool ANY_POOL_NAME 209.165.200.229 209.165.200.230 netmask 255.255.255.252

Notice in the topology there are 3 network addresses that would be translated based on the ACL created.

What will happen if more than 2 devices attempt to access the internet?

Step 3: Associate ACL 1 with the NAT pool.

Enter the command that associates ACL 1 with the NAT pool that you just created.

R2(config)# ip nat inside source list 1 pool ANY_POOL_NAME

Step 4: Configure the NAT interfaces.

Configure R2 interfaces with the appropriate inside and outside NAT commands.

R2(config)# interface s0/0/0
R2(config-if)# ip nat outside
R2(config-if)# interface s0/0/1
R2(config-if)# ip nat inside

Part 2: Verify NAT Implementation

Step 1: Access services across the internet.

From the web browser of L1, PC1, or PC2, access the web page for Server1.

Step 2: View NAT translations.

View the NAT translations on R2. Identify the internal source address of the PC and the translated address from the NAT pool in the command output.

R2# show ip nat translations

Answer script

Router R2

enable
configure terminal
access-list 1 permit 172.16.0.0 0.0.255.255
ip nat pool ANY_POOL_NAME 209.165.200.229 209.165.200.230 netmask 255.255.255.252
ip nat inside source list 1 pool ANY_POOL_NAME
interface s0/0/0
 ip nat outside
 interface s0/0/1
 ip nat inside
end

Download Packet Tracer Completed File

[sociallocker id=”54558″]
[wpdm_package id=’55936′]
[wpdm_package id=’55937′]
[/sociallocker]

[alert-note][one_half]

Previous Lab
6.4.5 Packet Tracer – Configure Static NAT

[/one_half][one_half_last]

Next Lab
6.6.7 Packet Tracer – Configure PAT

[/one_half_last][/alert-note]