1. A DHCP-enabled client PC has just booted. During which two steps will the client PC use broadcast messages when communicating with a DHCP server? (Choose…
Browsing: CCNA 2 Version 7
1. An EtherChannel link using LACP was formed between two switches, S1 and S2. While verifying the configuration, which mode combination could be utilized on both…
1. Which port state will switch ports immediately transition to when configured for PortFast? forwarding blocking listening learning 2. After the election of the root bridge…
1. A PC is to access a web server on another network. Which inter-VLAN method will provide the highest bandwidth at Layer 3 and also provide…
1. What happens to a port that is associated with VLAN 10 when the administrator deletes VLAN 10 from the switch? The port creates the VLAN…
1. Which statement is true about broadcast and collision domains? The size of the collision domain can be reduced by adding hubs to a network. Adding…
1. Which tasks can be accomplished by using the command history feature? (Choose two.) Set the command history buffer size. Recall previously entered commands. View a…
CCNAv7 SRWE Skills Assessment – SRWE Final Skills Exam (Equipment) Exam Answers Topology Assessment Objectives Part 1: Initialize, Reload and Configure Basic Device Settings (45 points,…
Lab – Troubleshoot IPv4 and IPv6 Static and Default Routers (Instructor Version) Topology Addressing Table Device Interface IP Address / Prefix R1 G0/0/0 192.168.0.1 /28 2001:db8:acad::1…
Lab – Configure IPv4 and IPv6 Static and Default Routes (Instructor Version) Topology Addressing Table Device Interface IP Address / Prefix R1 G0/0/0 172.16.1.1 /24 2001:db8:acad:2::1…
Lab – Configure a Wireless Network (Instructor Version) Introduction In this lab, you will configure basic settings on a wireless router and connect a PC to…
Lab – Switch Security Configuration (Instructor Version) Topology Addressing Table Device Interface / VLAN IP Address Subnet Mask R1 G0/0/1 192.168.10.1 255.255.255.0 Loopback 0 10.10.1.1 255.255.255.0…