1.
Refer to the exhibit. Which statement is true about the Frame Relay connection?
The Frame Relay connection is in the process of negotiation.
A congestion control mechanism is enabled on the Frame Relay connection.
The “ACTIVE” status of the Frame Relay connection indicates that the network is experiencing congestion.
Only control FECN and BECN bits are sent over the Frame Relay connection. No data traffic traverses the link.
2. What will be the result of adding the command ip dhcp excluded-address 192.168.24.1 192.168.24.5 to the configuration of a local router that has been configured as a DHCP server?
Traffic that is destined for 192.168.24.1 and 192.168.24.5 will be dropped by the router.
Traffic will not be routed from clients with addresses between 192.168.24.1 and 192.168.24.5.
The DHCP server will not issue the addresses ranging from 192.168.24.1 to 192.168.24.5.
The router will ignore all traffic that comes from the DHCP servers with addresses 192.168.24.1 and 192.168.24.5.
3. What are the symptoms when the s0/0/0 interface on a router is attached to an operational CSU/DSU that is generating a clock signal, but the far end router on the point-to-point link has not been activated?
show controllers indicates cable type DCE V.35. show interfaces s0/0/0 indicates serial down, line protocol down.
show controllers indicates cable type DCE V.35. show interfaces s0/0/0 indicates serial up, line protocol down.
show controllers indicates cable type DTE V.35. show interfaces s0/0/0 indicates serial up, line protocol down.
show controllers indicates cable type DTE V.35. show interfaces s0/0/0 indicates serial down, line protocol down.
Tags: Refer to the exhibit Computers on the internal network need access to all servers in the external network The only traffic that is permitted from the external network must be responses to requests that are initiated on the internal network Which security , Which important piece of troubleshooting information can be discovered about a serial interface using the show controllers command?, Refer to the exhibit In the partial router configuration that is shown what is the purpose of access list BLOCK_XYZ?, Refer to the exhibit A network administrator has been asked to configure PPP with PAP authentication over the serial link between routers R1 and R2 What additional configuration should be included on both routers to complete the task?, What is the result when the command permit tcp 10 25 132 0 0 0 0 255 any eq smtp is added to a named access control list and applied on the inbound interface of a router?, a dhcp server is configured with a block of excluded addresses what two devices would be assigned static addresses from the excluded address range?, refer to the exhibit partial results of the show access-lists and show ip interface fastethernet 0/1 commands for router r3 are shown there are no other acls in effect host a is unable to telnet to host b which action will correct the problem but still re, Refer to the exhibit A network administrator has been asked to configure PPP with CHAP authentication over the serial link between routers R1 and R2 What additional configuration should be included on both routers to complete the task?, refer to the exhibit a network administrator has issued the commands that are shown on router1 and router2 a later review of the routing tables reveals that neither router is learning the lan network of the neighbor router what is most likely the problem , A DHCP server is configured with a block of excluded addresses What two devices would be assigned static addresses from the excluded address range, refer to the exhibit which statement is true about frame relay traffic on r1, Which option represents a best practice for applying ACLs?, refer to the exhibit a network administrator is configuring a username and password for an ssh connection on checking the configuration the administrator notices that the password is displayed as plain text what configuration method can be used to encrypt, A network administrator determines that falsified routing information is propagating through the network What action can be used to address this threat?, WestSW is supposed to send VLAN information to EastSW but that did not occur What will force WestSW to send a VLAN update to EastSW?, A DHCP server is configured with a block of excluded addresses, Refer to the exhibit In the partial router configuration that is shown what is the purpose of access list BLOCK_XYZ, Computers on the internal network need access to all servers in the external network The only traffic that is permitted from the external network must be responses to requests that are initiated on the internal network Which security measure would satisfy, What are the symptoms when the s0/0/0 interface on a router is attached to an operational CSU/DSU that is generating a clock signal but the far end router on the point-to-point link has not been activated?, ccna exam 2011, Refer to the exhibit A network administrator is trying to backup the IOS software on R1 to the TFTP server He receives the error message that is shown in the exhibit and cannot ping the TFTP server from R1 What is an action that can help to isolate this p, WestSW is supposed to send VLAN information to EastSW but that did not occur What will force WestSW to send a VLAN update to EastSW, A network administrator has been asked to configure PPP with PAP authentication over the serial link between routers R1 and R2 What additional configuration should be included on both routers to complete the task?, What is the result when the command permit tcp 10 25 132 0 0 0 0 255 any eq smtp is added to a named access control list and applied on the inbound interface of a router, in the partial router configuration that is shown what is the purpose of access list block_xyz?, which statement is true about wildcard masks, new exam connections 3, EWAN Practice Final Exam - CCNA Exploration: Accessing the WAN (Version 4 0), What are two purposes for configuring a banner on a router? (Choose two ), which option represents a best practice for applying acls, A network administrator is configuring a username and password for an SSH connection On checking the configuration the administrator notices that the password is displayed as plain text What configuration method can be used to encrypt the password with th, Refer to the exhibit A network administrator has been asked to configure PPP with PAP authentication over the serial link between routers R1 and R2 What additional configuration should be included on both routers to complete the task, ccna 4 final exam 2012, In the partial router configuration that is shown what is the purpose of access list BLOCK_XYZ, Which configuration command would result in the output in the exhibit?, A recently patched application server is experiencing response time problems The network on which the application server is located has been experiencing occasional outages that the network team believes may be related to recent routing changes Network an, A network technician wants to implement SSH as the means by which a router may be managed remotely What are two procedures that the technician should use to successfully complete this task? (Choose two ), A network administrator tries to test the connectivity between routers R1 and R2 but the attempt to ping is unsuccessful Based on the show ip interface brief command outputs what could be the possible cause of the problem?, refer to the exhibit a network administrator is troubleshooting the serial connection between r1 and r2 there is no communication between r1 and r2 based on the output of the show ip interface brief command what is the cause of the problem?, A network administrator has been asked to configure PPP with CHAP authentication over the serial link between routers R1 and R2 What additional configuration should be included on both routers to complete the task?, a network administrator determines that falsified routing information is propagating through the network what action can be used to address this threat, A company has its headquarters office in Dallas and five branch offices located in New York Chicago Los Angeles Seattle and Atlanta WAN links are used for communications among offices in six sites In planning the WAN links the network designer is given, The technician assumes that the correct VLAN information will be propagated from WestSW as soon as the two switches are directly connected What is the reason WestSW did not send a VLAN update to EastSW?, Assuming that the rest of the configuration is correct and that the link has no physical layer problems what should the administrator do?, A network administrator has issued the commands that are shown on Router1 and Router2 A later review of the routing tables reveals that neither router is learning the LAN network of the neighbor router What is most likely the problem with the RIPng config, A DHCP server is configured with a block of excluded addresses What two devices would be assigned static addresses from the excluded address range? (Choose two, refer to the exhibit users on both sw1 and sw2 report that they are unable to communicate with each other a network administrator issues show ip interface brief commands on both routers to troubleshoot the connectivity between the two networks what action, Refer to the exhibit How is the TCP/IP configuration information specified by the default-router and dns-server commands made available?, refer to the exhibit results of the show vlan and show vtp status commands for switches s1 and s2 are displayed in the exhibit vlan 11 was created on s1 why is vlan 11 missing from s2, Refer to the exhibit A network administrator has been asked to configure PPP with CHAP authentication over the serial link between routers R1 and R2 What additional configuration should be included on both routers to complete the task