CCNA Discovery 3 Final Exam Answers

CCNA Exploration 3 Final Exam Answers

1. Which configuration changes will increment the configuration revision number on the VTP server?

configuring trunk links on the VTP server

configuring or changing the VTP password

configuring or changing the VTP domain name

configuring or changing the VTP version number

configuring or deleting a VLAN or creating a VLAN name

 

2.

CCNAExploration3FinalExamAnswers thumb CCNA Exploration 3 Final Exam Answers

Refer to the exhibit. VTP has been configured with VTP pruning enabled on all switches. If HostA sends a broadcast frame to SW1, which devices will receive the frame?

SW1, SW3, HostF

SW1, HostB, HostC

SW1, SW2, SW3, SW4, HostF

SW1, SW2, SW3, SW4, all hosts

 

3.

CCNA3Final thumb CCNA Exploration 3 Final Exam Answers

Refer to the exhibit. The configuration steps that are listed in the exhibit have been entered in switch S1 via the console. Subsequent attempts to telnet to the switch are not successful. What is causing the problem?

The switch must be configured with SSH version 1.

The transport input command must specify Telnet access.

The RSA keys must be returned to zero before SSH will permit Telnet access.

The ip domain-name command must also be entered in line configuration mode for the vty lines.

(more…)

Tags: What is the effect of the command copy running-config tftp?, Refer to the exhibit How will the configuration affect users who manage the switch over HTTP?, Which STP port type can only appear once on a segment and must be present in order for traffic to flow on that segment?, Refer to the exhibit Which device should be included in the network topology to provide Layer 2 connectivity for all LAN devices provide multiple collision domains and also provide a connection to the rest of the network?, Using the command copy tftp:backup cfg startup-config an administrator downloaded a saved configuration from a TFTP server to a switch Why does the administrator not detect any changes in the switch configuration after the download completes?, Which set of configuration commands is needed to allow a host in VLAN 100 to manage switch SW1?, What is one disadvantage that 802 11a wireless has compared to 802 11g?, What is the effect of the command copy running-config tftp, The network administrator wants to configure a switch to pass VLAN update information to other switches in the domain but not update its own local VLAN database Which two steps should the administrator perform to achieve this? (Choose two ), Which configuration changes will increment the configuration revision number on the VTP server?, What is one disadvantage that 802 11a wireless has compared to 802 11g, Which set of configuration commands is needed to allow a host in VLAN 100 to manage switch SW1, Which statement describes how hosts on VLANs communicate?, ccna exploration 3 final exam, Refer to the exhibit Which three options correctly identify information that could be associated with this output?(Choose three ), Which security protocol or measure would provide the greatest protection for a wireless LAN?, Refer to the exhibit How will the configuration affect users who manage the switch over HTTP, ccna exploration 3 final exam answers, Which STP port type can only appear once on a segment and must be present in order for traffic to flow on that segment, Refer to the exhibit The network administrator has just added VLAN 50 to Switch1 and Switch2 Hosts A B C and D are correctly configured with IP addresses in the subnet range for VLAN 50 Host A can communicate with host B but cannot communicate with host C, What is a possible impact of setting too short an aging time in the MAC address table of a switch?, ccna 3 final exam answers, Refer to the exhibit Which configuration command would result in the output in the exhibit?, How will the configuration affect users who manage the switch over HTTP?, While configuring a new switch a network administrator configures the switch as an HTTP server What benefits does this configuration provide?, How will the configuration affect users who manage the switch over HTTP, Refer to the exhibit VLAN 20 was recently added on the network Users on VLAN 20 on SW1 start complaining that they do not have connectivity to the users on the same VLAN on switch SW2 What should be done to remedy the problem?, An administrator is troubleshooting a PC on the network which is suffering from slow and intermittent connectivity The PC has a ping success rate to the default gateway of less than half the ping attempts Other PCs on the switch can consistently ping the , Refer to the exhibit Which two switch interfaces will dynamically learn one MAC address and shut down the port if a second device is connected? (Choose two ), Using the command copy tftp:backup cfg startup-config an administrator downloaded a saved configuration from a TFTP server to a switch Why does the administrator not detect any changes in the switch configuration after the download completes, ccna discovery 3 final exam answers, The network administrator wants to configure a switch to pass VLAN update information to other switches in the domain but not update its own local VLAN database Which two steps should the administrator perform to achieve this?, Which parameter is used to uniquely identify one wireless network from another?, ccna discovery 3 final exam, Which device should be included in the network topology to provide Layer 2 connectivity for all LAN devices provide multiple collision domains and also provide a connection to the rest of the network?, What impact does the use of the mdix auto configuration command have on an Ethernet interface on a switch?, Refer to the exhibit SW-T has been configured with a single trunking interface Which VLANs will be allowed across the trunk?, Which security protocol or measure would provide the greatest protection for a wireless LAN, exploration 3 final exam, Refer to the exhibit Which statement is true about the Ethernet interfaces shown in the network?, Refer to the exhibit What is true of the configuration of switch S1?, Which parameter is used to uniquely identify one wireless network from another, Refer to the exhibit Which device should be included in the network topology to provide Layer 2 connectivity for all LAN devices provide multiple collision domains and also provide a connection to the rest of the network, Which statement describes how hosts on VLANs communicate, The network administrator wants to configure a switch to pass VLAN update information to other switches in the domain but not update its own local VLAN database Which two steps should the administrator perform to achieve this, Refer to the exhibit Which two settings show the default value of VTP configuration on a Cisco 2960 switch? (Choose two ), cisco exploration 3 final exam, CCNA exploration 3 final, ccna exploration 3 final exam answers 2012, Which configuration on the vty lines provides the best security measure for network administrators to remotely access the core routers at headquarters?