CCNA Exploration 3 Chapter 4 Exam Answers

1.

CCNAExploration3Chapter4ExamAnswers thumb CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. Which two facts can be confirmed by this output? (Choose two.)

If this switch is added to an established network, the other VTP-enabled switches in the same VTP domain will consider their own VLAN information to be more recent than the VLAN information advertised by this switch.

This switch shows no configuration revision errors.

This switch has established two-way communication with the neighboring devices.

This switch is configured to advertise its VLAN configuration to other VTP-enabled switches in the same VTP domain.

This switch is configured to allows the network manager to maximize bandwidth by restricting traffic to specific network devices.

 

2. Which two statements describe VTP transparent mode operation? (Choose two.)

Transparent mode switches can create VLAN management information.

Transparent mode switches can add VLANs of local significance only.

Transparent mode switches pass any VLAN management information that they receive to other switches.

Transparent mode switches can adopt VLAN management changes that are received from other switches.

Transparent mode switches originate updates about the status of their VLANS and inform other switches about that status.

 

3.

CCNAExploration3Module4ExamAnswers thumb CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. All switches in the network participate in the same VTP domain. What happens when the new switch SW2 with a default configuration and revision number of 0 is inserted in the existing VTP domain Lab_Network?

The switch operates as a VTP client.

The switch operates in VTP transparent mode.

The switch operates as a VTP server and deletes the existing VLAN configuration in the domain.

The switch operates as a VTP server, but does not impact the existing VLAN configuration in the domain.

The switch operates as a VTP server in the default VTP domain and does not affect the configuration in the existing VTP domain.

 

4.

CCNAExploration3ExamAnswers thumb2 CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. All switches in the VTP domain are new. Switch SW1 is configured as a VTP server, switches SW2 and SW4 are configured as VTP clients, and switch SW3 is configured in VTP transparent mode. Which switch or switches receive VTP updates and synchronize their VLAN configuration based on those updates?

All switches receive updates and synchronize VLAN information.

Only switch SW2 receives updates and synchronizes VLAN information.

Only switches SW3 and SW4 receive updates and synchronize VLAN information.

SW3 and SW4 receive updates, but only switch SW4 synchronizes VLAN information.

 

5. Which two statements are true about the implementation of VTP? (Choose two.)

Switches must be connected via trunks.

The VTP domain name is case sensitive.

Transparent mode switches cannot be configured with new VLANs.

The VTP password is mandatory and case sensitive.

Switches that use VTP must have the same switch name.

 

6. Which three VTP parameters must be identical on all switches to participate in the same VTP domain? (Choose three.)

revision number

domain name

pruning

mode

domain password

version number

 

7.

CCNA3ExamAnswers thumb2 CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. Switches SW1 and SW2 are interconnected via a trunk link but failed to exchange VLAN information. The network administrator issued the show vtp status command to troubleshoot the problem. On the basis of the provided command output, what could be done to correct the problem?

Switch SW2 must be configured as a VTP client.

The switches must be interconnected via an access link.

The switches must be configured with the same VTP domain name.

Both switches must be configured with the same VTP revision number.

 

8. What are two features of VTP client mode operation? (Choose two.)

unable to add VLANs

can add VLANs of local significance

forward broadcasts out all ports with no respect to VLAN information

can only pass VLAN management information without adopting changes

can forward VLAN information to other switches in the same VTP domain

 

9. What statement describes the default propagation of VLANs on a trunked link?

only the native VLAN

VLANs 1 to 1005

only VLAN 1

all VLANs

no VLANs

 

10. What does a client mode switch in a VTP management domain do when it receives a summary advertisement with a revision number higher than its current revision number?

It suspends forwarding until a subset advertisement update arrives.

It issues an advertisement request for new VLAN information.

It increments the revision number and forwards it to other switches.

It deletes the VLANs not included in the summary advertisement.

It issues summary advertisements to advise other switches of status changes.

 

11.

CCNA3Answers thumb2 CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. The switches in the exhibit are connected with trunks within the same VTP management domain. Each switch is labeled with its VTP mode. A new VLAN is added to Switch3. This VLAN does not show up on the other switches. What is the reason for this?

VLANs cannot be created on transparent mode switches.

Transparent mode switches do not forward VTP advertisements.

VLANs created on transparent mode switches are not included in VTP advertisements.

Server mode switches neither listen to nor forward VTP messages from transparent mode switches.

 

12. Which statement is true when VTP is configured on a switched network that incorporates VLANs?

VTP is only compatible with the 802.1Q standard.

VTP adds to the complexity of managing a switched network.

VTP allows a switch to be configured to belong to more than one VTP domain.

VTP dynamically communicates VLAN changes to all switches in the same VTP domain.

 

13.

CCNAExplorationLANSwitchingandWirelessChapter4ExamAnswers thumb CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. Switch1 is not participating in the VTP management process with the other switches that are shown in the exhibit. What are two possible explanations for this? (Choose two.)

Switch1 is in client mode.

Switch2 is in server mode.

Switch2 is in transparent mode.

Switch1 is in a different management domain.

Switch1 has end devices that are connected to the ports.

Switch1 is using VTP version 1, and Switch2 is using VTP version 2.

 

14. A network administrator is replacing a failed switch with a switch that was previously on the network. What precautionary step should the administrator take on the replacement switch to avoid incorrect VLAN information from propagating through the network?

Enable VTP pruning.

Change the VTP domain name.

Change the VTP mode to client.

Change all the interfaces on the switch to access ports.

 

15.

CCNA3Chapter4ExamAnswers thumb CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. S2 was previously used in a lab environment and has been added to the production network in server mode. The lab and production networks use the same VTP domain name, so the network administrator made no configuration changes to S2 before adding it to the production network. The lab domain has a higher revision number. After S2 was added to the production network, many computers lost network connectivity. What will solve the problem?

Reset the revision number on S2 with either the delete VTP command or by changing the domain name and then changing it back.

Re-enter all appropriate VLANs, except VLAN 1, manually on Switch1 so that they propagate throughout the network.

Change S1 to transparent VTP mode to reclaim all VLANs in vlan.dat and change back to server mode.

Change S2 to client mode so the VLANs will automatically propagate.

 

16.

CCNA3Chapter4Answers thumb CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. What information can be learned from the output provided?

It verifies the configured VTP password.

It verifies the VTP domain is configured to use VTP version 2.

It verifies VTP advertisements are being exchanged.

It verifies the VTP domain name is V1.

 

17. How are VTP messages sent between switches in a domain?

Layer 2 broadcast

Layer 2 multicast

Layer 2 unicast

Layer 3 broadcast

Layer 3 multicast

Layer 3 unicast

 

18. What causes a VTP configured switch to issue a summary advertisement?

A five-minute update timer has elapsed.

A port on the switch has been shutdown.

The switch is changed to the transparent mode.

A new host has been attached to a switch in the management domain.

 

19. Which two statements are true about VTP pruning? (Choose two.)

Pruning is enabled by default.

Pruning can only be configured on VTP servers.

Pruning must be configured on all VTP servers in the domain.

VLANs on VTP client-mode switches will not be pruned.

Pruning will prevent unnecessary flooding of broadcasts across trunks.

 

20.

CCNAChapter4ExamAnswers thumb CCNA Exploration 3 Chapter 4 Exam Answers

Refer to the exhibit. Switch S1 is in VTP server mode. Switches S2 and S3 are in client mode. An administrator accidentally disconnects the cable from F0/1 on S2. What will the effect be on S2?

S2 will retain the VLANs as of the latest known revision.

S2 will automatically transition to VTP transparent mode.

S2 will remove all VLANs from the VLAN database until the cable is reconnected.

S2 will automatically send a VTP request advertisement to 172.17.99.11 when the cable is reconnected.

Tags: ccna 3 chapter 4, ccna exploration 3 chapter 4 exam answers, eswitching chapter 4, A switch that is configured in VTP server mode receives a VTP update with a higher revision number from a neighbor switch that is configured in VTP client mode What will the VTP server switch do with the update?, When a switch that is configured as a VTP client sends a VTP request to another switch that is configured as a VTP server how does the server respond?, Refer to the exhibit No other VLAN commands have been issued previously on this switch What is the effect after these commands are issued?, Which two statements describe VTP transparent mode operation? (Choose two ), ccna exploration 3 chapter 4, ccna exploration 3 chapter 4 answers, Refer to the exhibit S2 was previously used in a lab environment and has been added to the production network in server mode The lab and production networks use the same VTP domain name so the network administrator made no configuration changes to S2 befo, Refer to the exhibit Which two statements are correct about the VTP configuration on S2? (Choose two ), ccna 3 chapter 4 exam answers, Which three VTP parameters must be identical on all switches to participate in the same VTP domain? (Choose three ), Refer to the exhibit All switches in the VTP domain are new Switch SW1 is configured as a VTP server switches SW2 and SW4 are configured as VTP clients and switch SW3 is configured in VTP transparent mode Which switch or switches receive VTP updates and s, eswitching chapter 4 - ccna exploration lan switching and wireless (version 4 0) answers, Refer to the exhibit All switches in the network participate in the same VTP domain What happens when the new switch SW2 with a default configuration and revision number of 0 is inserted in the existing VTP domain Lab_Network?, exploration 3 chapter 4, refer to the exhibit this switch is to be added to the production network which two facts about vlans and vtp operation can be confirmed by this output? (choose two ), A switch that is configured in VTP server mode receives a VTP update with a higher revision number from a neighbor switch that is configured in VTP client mode What will the VTP server switch do with the update, Which two VTP parameters must be identical on all switches in the network in order to participate in the same VTP domain? (Choose two ), ccna 3 chapter 4 exam, eswitching chapter 4 - ccna exploration lan switching and wireless (version 4 0), What does a client mode switch in a VTP management domain do when it receives a summary advertisement with a revision number higher than its current revision number?, which two vtp parameters must be identical on all switches in the network in order to participate in the same vtp domain?, Refer to the exhibit Switch S1 is in VTP server mode Switches S2 and S3 are in client mode An administrator accidentally disconnects the cable from F0/1 on S2 What will the effect be on S2?, Exploration 3 chapter 4 answers, ccna eswitching chapter 4 answers, Which two statements are true about VLAN implementation, No other VLAN commands have been issued previously on this switch What is the effect after these commands are issued?, When a switch that is configured as a VTP client sends a VTP request to another switch that is configured as a VTP server how does the server respond, What are two features of VTP client mode operation? (Choose two ), ccna exploration chapter 4 exam answers, eswitching chapter 3, ccna exploration 3 chapter 4 answer, ESwitching Chapter 4 - CCNA Exploration, Which two statements are true about the implementation of VTP? (Choose two ), eswitching chapter 4 answer, chapter 4 exam, cisco exploration 3 chapter 4 answers, VTP revision number on a VTP server to change, ccna3 chapter 4 answers, Eswitching chapter 4 exam answers, What causes a VTP configured switch to issue a summary advertisement?, ESwitching Chapter 3 - CCNA Exploration, Which two statements describe VTP transparent mode operation, ccna 3 exploration chapter 4 answers, eswitching chapter 3 - ccna exploration: lan switching and wireless, which two statements describe vtp transparent mode operation (choose two ), chapter 4 - ccna exploration: lan switching and wireless (version 4 0), eswitching chapter 4 - ccna exploration: lan switching and wireless (version 4 0) answers

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>