CCNA Exploration 1 Chapter 4 Exam Answers

1. What mechanism is used by TCP to provide flow control as segments travel from source to destination?

sequence numbers

session establishment

window size

acknowledgments

 

2
 CCNAExploration1Chapter4ExamAnswers thumb CCNA Exploration 1 Chapter 4 Exam Answers

Based on the transport layer header shown in the diagram, which of the following statements describe the established session? (Choose two.)

This is a UDP header.

This contains a Telnet request.

This contains a TFTP data transfer.

The return packet from this remote host will have an Acknowledgement Number of 43693.

This is a TCP header.

 

3. Which information is found in both the TCP and UDP header information?

sequencing

flow control

acknowledgments

source and destination

 

4. Which transport layer protocol provides low overhead and would be used for applications which do not require reliable data delivery?

TCP

IP

UDP

HTTP

DNS

 

5. Why are port numbers included in the TCP header of a segment?

to indicate the correct router interface that should be used to forward a segment

to identify which switch ports should receive or forward the segment

to determine which Layer 3 protocol should be used to encapsulate the data

to enable a receiving host to forward the data to the appropriate application

to allow the receiving host to assemble the packet in the proper order

 

6. Which three features allow TCP to reliably and accurately track the transmission of data from source to destination?

encapsulation

flow control

connectionless services

session establishment

numbering and sequencing

best effort delivery

 

7. Which is an important characteristic of UDP?

acknowledgement of data delivery

minimal delays in data delivery

high reliability of data delivery

same order data delivery

 

8. What are two features of the User Datagram Protocol (UDP)? (Choose two.)

flow control

low overhead

connectionless

connection-oriented

sequence and acknowledgements

 

9
CCNAExploration1Module4ExamAnswers thumb CCNA Exploration 1 Chapter 4 Exam Answers
Refer to the exhibit. The initial TCP exchange of data between two hosts is shown in the exhibit. Assuming an initial sequence number of 0, what sequence number will be included in Acknowledgment 2 if Segment 6 is lost?

2

3

6

1850

3431

3475

 

10
 CCNA1Chapter4ExamAnswers thumb CCNA Exploration 1 Chapter 4 Exam Answers
Refer to the exhibit. Host1 is in the process of setting up a TCP session with Host2. Host1 has sent a SYN message to begin session establishment. What happens next?
Host1 sends a segment with the ACK flag = 0, SYN flag = 0 to Host2.

Host1 sends a segment with the ACK flag = 1, SYN flag = 0 to Host2.

Host1 sends a segment with the ACK flag = 1, SYN flag = 1 to Host2.

Host2 sends a segment with the ACK flag = 0, SYN flag = 1 to Host1.

Host2 sends a segment with the ACK flag = 1, SYN flag = 0 to Host1.

Host2 sends a segment with the ACK flag = 1, SYN flag = 1 to Host1.

 

11. Why is flow control used for TCP data transfer?

to synchronize equipment speed for sent data

to synchronize and order sequence numbers so data is sent in complete numerical order

to prevent the receiver from being overwhelmed by incoming data

to synchronize window size on the server

to simplify data transfer to multiple hosts

 

12. Which two options represent Layer 4 addressing? (Choose two.)

identifies the destination network

identifies source and destination hosts

identifies the communicating applications

identifies multiple conversations between the hosts

identifies the devices communicating over the local media

 

13. With TCP/IP data encapsulation, which range of port numbers identifies all well-known applications?

0 to 255

256 to 1022

0 to 1023

1024 to 2047

49153 to 65535

 

14. During a TCP communication session, if the packets arrive to the destination out of order, what will happen to the original message?

The packets will not be delivered.

The packets will be retransmitted from the source.

The packets will be delivered and reassembled at the destination.

The packets will be delivered and not reassembled at the destination.

 

15
CCNA1ExamAnswers thumb1 CCNA Exploration 1 Chapter 4 Exam Answers 

Refer to the exhibit. In line 7 of this Wireshark capture, what TCP operation is being performed?

session establishment

segment retransmit

data transfer

session disconnect

 

16.

CCNA1Answers thumb1 CCNA Exploration 1 Chapter 4 Exam Answers

Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose two.)

The local host is using three client sessions.

The local host is using web sessions to a remote server.

The local host is listening for TCP connections using public addresses.

The local host is using well-known port numbers to identify the source ports.

The local host is performing the three-way handshake with 192.168.1.101:1037.

 

17. Which event occurs during the transport layer three-way handshake?

The two applications exchange data.

TCP initializes the sequence numbers for the sessions.

UDP establishes the maximum number of bytes to be sent.

The server acknowledges the bytes of data received from the client.

 

18. Which OSI model layer is responsible for regulating the flow of information from source to destination, reliably and accurately?

application

presentation

session

transport

network

 

19. After a web browser makes a request to a web server that is listening to the standard port, what will be the source port number in the TCP header of the response from the server?

13

53

80

1024

1728

 

20
CCNAExplorationNetworkFundamentalsChapter4ExamAnswers thumb CCNA Exploration 1 Chapter 4 Exam Answers
Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During the download process, Server 1 does not receive an acknowledgment from Host A for several bytes of transferred data. What action will Server 1 take as a result?

create a Layer 1 jam signal

reach a timeout and resend the data that needs to be acknowledged

send a RESET bit to the host

change the window size in the Layer 4 header

 

21. What is dynamically selected by the source host when forwarding data?

destination logical address

source physical address

default gateway address

source port

Tags: Why is flow control used for TCP data transfer?, Based on the transport layer header shown in the diagram which of the following statements describe the established session? (Choose two ), Which is an important characteristic of UDP?, Why are port numbers included in the TCP header of a segment?, Which three features allow TCP to reliably and accurately track the transmission of data from source to destination? (Choose three ), why is flow control used for tcp data transfer, What mechanism is used by TCP to provide flow control as segments travel from source to destination?, What is dynamically selected by the source host when forwarding data?, which is an important characteristic of udp, With TCP/IP data encapsulation which range of port numbers identifies all well-known applications?, Refer to the exhibit Host1 is in the process of setting up a TCP session with Host2 Host1 has sent a SYN message to begin session establishment What happens next?, Based on the transport layer header shown in the diagram which of the following statements describe the established session?, why are port numbers included in the tcp header of a segment answer, Which transport layer protocol provides low overhead and would be used for applications which do not require reliable data delivery?, Which two address fields are located in the TCP segment header? (Choose two ), why are port numbers included in the tcp header of a segment, ccna exploration 1 chapter 4 answers, What is dynamically selected by the source host when forwarding data, Which three features allow TCP to reliably and accurately track the transmission of data from source to destination?, Which event occurs during the transport layer three-way handshake?, what mechanism is used by TCP to provide flow control as segments travel from source to destination, which transport layer protocol provides low overhead, Which information is found in both the TCP and UDP header information?, With TCP/IP data encapsulation which range of port numbers identifies all well-known applications, what is dynamically selected by the source host when forwarding data answer, Based on the transport layer header shown in the diagram which of the following statements describe the established session, What are two features of the User Datagram Protocol (UDP)? (Choose two ), Which two address fields are located in the TCP segment header?, Based on the transport layer header shown in the diagram, which information is found in both the tcp and udp header information sequencing, exploration 1 chapter 4, ccna exploration network fundamentals chapter 4 answers, ccna exploration 1 chapter 4 exam, Which OSI model layer is responsible for regulating the flow of information from source to destination reliably and accurately?, Which transport layer protocol will allow segments to be exchanged between two hosts with low overhead and no mechanism for retransmission?, why is flow control used for tcp data transfer to s, Which three features allow TCP to reliably and accurately track the transmission of data from source to destination, based on the transport layer header shown, what mechanism is used by tcp to provide flow control as segments travel from source to destination sequence numbers, Which two address fields are located in the TCP segment header, which event occurs during the transport layer three-way handshake, what is an important characteristic of UDP, ccna 1 chapter 4 questions and answers, Why are port numbers included in the TCP header of a segment? to indicate the correct router interface that should be used to forward a segment to identify which switch ports should receive or forward the segment to determine which Layer 3 protocol should, Which two transport layer protocols enable hosts to communicate and transfer data? (Choose two ), Which transport layer protocol provides low overhead and would be used for applications which do not require reliable data delivery, Which information is found in both the TCP and UDP header information, cisco exploration 1 chapter 4, what is dynamically selected by the source host, What are two features of the User Datagram Protocol (UDP)? (Choose two ) flow control low overhead connectionless connection-oriented sequence and acknowledgements

Related posts:

  1. CCNA Exploration 1 Chapter 2 Exam Answers
  2. CCNA Exploration 1 Chapter 3 Exam Answers
  3. CCNA Exploration 1 Chapter 1 Exam Answers

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>